Emerson Radio HD7099A - Manual (Page 11)

10
PROGRAMMED PLAYBACK
You can program the player to play only the tracks that you want to hear, in the
specific order that you want to hear them. Up to a total of 24 tracks can be
programmed. You may program certain tracks to play more than once if desired.
IMPORTANT: The player can only be programmed when it is in the Stop mode
and the total number of tracks and playing time appear on the display. If the display
is blank press the PLAY/PAUSE button to start the disc. When playback begins s
press the STOP button. If the disc was playing, press the STOP button so
that the total tracks and playing time appear on the display.
1.) While the total tracks and playing time appear on the
display press the PROG (Program) button. "PROG"
indicator flashes and Program No. "P - 01" appears.
2.) Press SKIP or SKIP button until the first track
to be programmed appears in the display.
Example: Track # 7.
3.) Press the PROG (Program) button again to enter the
selected track in the memory. The track indicator
returns to a "00" and the Program No. advances to
"P - 02".
4.) Repeat Steps 2 and 3 until you have entered up to a total of 24 tracks in the
memory.
5.) Press the PLAY/PAUSE button to begin
programmed playback. The “PROG” indicator stops
flashing and remains in the display. The player will
play the tracks you selected in the programmed order.
When the last track has played the player stops and
the total tracks and playing time appear.
6.) To cancel programmed playback press the STOP button twice. The program m
will also be canceled if the CD Door is opened or if the power is interrupted.
HD7096A_7099A_071403.p65 14/7/2003, 10:34 10