Exmark TT4817KAC - Manual (Page 9)

- 4 -
1.4 OPERATION
Although hazard control and accident prevention are partially dependent upon the
design and configuration of the equipment, these factors are also dependent upon
the awareness, concern, prudence and proper training of the personnel involved in
the operation, transport, maintenance and storage of the equipment. It is essential
that all Operator Safety Mechanisms be connected and in operating condition prior
to use for mowing.
WARNING
POTENTIAL HAZARD
♦
Operating engine parts, especially the muffler, become
extremely hot.
WHAT CAN HAPPEN
♦
Severe burns can occur on contact.
♦
Debris, such as leaves, grass, brush, etc. can catch fire.
HOW TO AVOID THE HAZARD
♦
Allow engine parts, especially the muffler, to cool before
touching.
♦
Remove accumulated debris from muffler and engine area.
♦
Install and maintain in working order a spark arrester before
using equipment on forest-covered, grass-covered, or
brush-covered unimproved land.
WARNING
POTENTIAL HAZARD
♦
Hands, feet, hair, clothing, or accessories can become
entangled in rotating parts.
WHAT CAN HAPPEN
♦
Contact with rotating parts can cause traumatic amputation
or severe lacerations.
HOW TO AVOID THE HAZARD
♦
Do not operate the machine without guards, shields, and
safety devices in place and working.
♦
Keep hands, feet, hair, jewelry, or clothing away from
rotating parts.
1.4.1 Give complete, undivided attention to the job at hand.
1.4.2 Mow only in daylight or good artificial light, keeping away from holes and hidden
hazards. Do Not operate the mower when children or others are in the area!
1.4.3 When feasible, avoid operating the equipment in wet grass.