Warning – Exmark TT4817KAC User Manual
Page 12
- 7 -
WARNING
POTENTIAL HAZARD
♦
Hydraulic fluid escaping under pressure can penetrate
skin and cause injury.
WHAT CAN HAPPEN
♦
Fluid accidentally injected into the skin must be
surgically removed within a few hours by a doctor
familiar with this form of injury or gangrene may result.
HOW TO AVOID THE HAZARD
♦
Make sure all hydraulic fluid hoses and lines are in
good condition an all hydraulic connections and fittings
are tight before applying pressure to hydraulic system.
♦
Keep body and hands away from pinhole leaks or
nozzles that eject high pressure hydraulic fluid.
♦
Use cardboard or paper and not hands to find
hydraulic leaks.
♦
Safely relieve all pressure in the hydraulic system, by
locking drive levers in neutral and shutting off engine,
before performing any work on the hydraulic system.
1.6 RIDING ATTACHMENTS
1.6.1
Use only Exmark riding attachments. The use of other than Exmark riding
attachments may create a hazardous condition resulting in injury.
1.7 SAFETY SIGNS
1.7.1
Keep all safety signs legible. Remove all grease, dirt, and debris from safety
signs.
1.7.2
Safety signs must be replaced if they are missing or illegible.
1.7.3
When new components are installed, be sure that current safety signs are affixed
to the replaced components.
1.7.4
New safety signs may be obtained from your authorized Exmark equipment dealer
or distributor or from Exmark Mfg. Co. Inc.
1.7.5
Safety signs may be affixed by peeling off the backing to expose the adhesive
surface. Apply only to a clean, dry surface. Smooth to remove any air bubbles.
1.7.6
Familiarize yourself with the following safety signs and instruction labels. They are
critical to the safe operation of your Exmark commercial mower.
PART NO. 1-403143
LOCATION: Right Side of Rear
Surface of Engine
Deck
PART NO. 1-553049
LOCATION: Front of Mower
Deck Top Surface