Precision Medical EasyDial Reg Oxygen Regulator - Manual (Page 3)

wARNING
To prevent risk of burns, fire or injury to person(s):
• Handle the Dial Regulator carefully at all times and use the Regulator
according to the instructions in this manual.
• Oxygen cylinder should be in an upright position when in use.
• ALwAYS confirm prescribed flow before administering to patient and
monitor flow on a frequent basis.
• Always follow ANSI and CGA standards for Medical Gas Products and
Flowmeters and Oxygen Handling.
• DO NOT use tape, oils, greases, petroleum jellies, organic lubricants,
paint or any other hydrocarbon based or combustible materials on or
near this Dial Regulator.
• DO NOT use if oil, grease or contaminants are present on or around
Regulator, cylinder valve or connecting devices.
• DO NOT use near any type of flame or flammable/explosive substances,
vapors or atmosphere.
• DO NOT smoke in an area where oxygen is being administered.
CAUTION
• Only personnel instructed and trained in its use should operate this
Dial Regulator.
• This Dial Regulator contains magnetic, ferrous material that may affect
the results of an MRI.
• Ensure all connections are tight and leak free.
• Only use oxygen safe leak detector to test for leaks.
• Store the Dial Regulator in a clean area when not in use.
• This Dial Regulator is not intended to be used with an oxygen
conserving device.
• DO NOT direct flow of oxygen at any person, or flammable material
when “cracking” cylinder.
• DO NOT autoclave.
• DO NOT gas sterilize with EtO (Ethylene Oxide).
• DO NOT clean with aromatic hydrocarbons.
• DO NOT attempt to repair Regulator.
• DO NOT immerse the Regulator in any kind of liquid. This will void the
warranty.