Precision Medical PM15 EasyAir Compressor - Manual (Page 8)

7
CLEANING / MAINTENANCE
WARNING
• Turn the Easy Air Compressor off and disconnect from any
external power source before cleaning.
• DO NOT attempt to repair. There are no serviceable parts inside.
To clean the filter (weekly):
1. Unplug Compressor.
2. Check air inlet filters for dust buildup.
3. If dust buildup occurs, remove air inlet filters and wash in warm, soapy
water and rinse.
4. Absorb excess water from filter with a dry towel.
5. Return the air inlet filters.
Cleaning for Exterior Components:
Use a clean cloth or sponge dampened with soap and water. Wipe dry
with a clean cloth or paper towel.
CAUTION
• Excessive dust buildup on filter will reduce performance of
Compressor. If this occurs, clean or replace with a new filter.
• The air filter does not filter out saline. Treatments using nebulized
saline will draw the saline mist back into the Compressor. Saline
causes rapid deterioration of the compressor seals and will void the
warranty.
At ~8500 Hours (or as needed) :
Return the Easy Air Compressor to your Provider for Compressor
Maintenance (including rebuilding pump).
Contact Precision Medical, Inc. for Preventative Maintenance Services.