2 panel mounting – Precision Digital PD562 User Manual
Page 28
Do not excessively tighten the mounting bracket screws. Excessive tightening may lead to
controller or panel damage.
!
CAUTION
7.2 Panel Mounting
PD568
PD562
Installation Steps
1. Cut the mounting panel. (Refer to 7.1 Dimensions and Panel Cutouts)
2. Insert the controller through the front of the panel rear terminals first.
3. On applicable models, attach the right and left mounting bracket and secure it to the panel.
Panel
Mounting Bracket
Panel
Mounting Bracket
PD560 Series Nova Digital Process and Temperature Meter
Instruction Manual
28
This manual is related to the following products: