Elo TouchSystems ET1915L User Manual

Page 11

Installing the Serial Touch Driver (not applicable to Acoustic

Pulse Recognition monitors)

Installing the Serial Touch Driver for Windows XP,

Windows 2000, Me, 95/98 and NT4.0

NOTE:

For Windows 2000 and NT 4.0 you must have administrator access rights to install

the driver.

1 Insert the Elo CD-ROM in your computer's CD-ROM drive.

2 If the AutoStart feature for your CD-ROM drive is active, the system automatically detects the

CD and starts the setup program.

3 Follow the directions on the screen to complete the driver setup for your version of Windows.

4 If the AutoStart feature is not active:

5 Click Start > Run.

6 Click the Browse button to locate the EloCd.exe program on the CD-ROM.

7 Click Open, then OK to run EloCd.exe.

8 Follow the directions on the screen to complete the driver setup for your version of Windows.

To install Windows 2000 and Windows XP, you must use the "update driver" method; you will not

find a setup.exe file within the download.