EVGA 141-LF-E658 - Manual (Page 50)

50
Appendix A. POST Codes for the EVGA
P55 FTW 200 Motherboard
This section provides the AMI POST Codes (Table 6)
for the EVGA P55 FTW 200 Motherboard during
system boot up.
The POST Codes are displayed on the Debug LED
readout located directly onboard the motherboard.
This Debug LED will also display current CPU
temperatures after the system has fully booted
into the Operating System.
Table 6. AMI POST Code
Code Description
03 Initialize BIOS.
04 Check Battery Power and CMOS
05 Initialize interrupt controlling hardware/vector table
06 Initialize system timer
07 Fixes CPU POST interface calling pointer
08 Primary initialization of CPU
C0 Secondary initialization of CPU
C1 Set up boot strap processor information
C2 Set up boot strap processor for POST
C5 Enumerate and set up application processors
C6 Re-enable cache for boot strap processor
C7 Early CPU initialization exit
0A Initialize keyboard controller
Debug LED with CPU
Temperature Monitor