L1 l2 – Meliconi Gumbody Universal 6 Light User Manual

Page 5

LIGHT FUNCTION: Lights up the keys on the remote control

Press the LIGHT

button the remote control keys will light up immediately. This is very useful in the

dark to find which key to press. The light goes out when the LIGHT button is pressed again or after about
10 seconds if no keys are pressed.

TV FUNCTIONS ALWAYS ACTIVE

The TV functions VOLUME + / VOLUME – / MUTE and AV are always available, regardless of which appliance
is being used.

To use this function the remote control

you want to copy the signal from must still work.

LEARN FUNCTION

This function allows the remote control to:

Learn the missing functions of an original remote control and memorize them on the keys F1 -

F2 -F3 - F4 or on any other key and thus replace the original remote control

Learn all the functions of a new remote control issued in the future and thus not yet included

in the database of the universal remote control.

This indicates the maximum distance for data exchange between the two remote controls. In order
to copy the signals the remote controls must be positioned at half this distance, taking care not to move
them until the process is completed.

Learn the missing functions of an original remote control and

memorize them on any key of the

U N I V E R S A L 6 L i g h t

To copy the signals it is first of all necessary to position

the remote controls at the correct distance from each other:

1. Position the original remote control in front of the universal

remote control, so that the areas that emit the infrared
signals are in front of each other and about 5 cm apart.

2. Press the LEARN key briefly and then, within five seconds,

press and hold down any key on the original remote
control. The yellow light under the LEARN key should
start to flash; if not, the remote controls should be moved
closer together.

3. Gradually increase the distance between the two remote

controls, making sure they are still in line with each other,
until the yellow light under the LEARN key stops flashing.

5 cm

Max dist

4. Press the selection key of the required appliance.

5. Briefly press the LEARN key together with one of the keys

F1 - F2 - F3 - F4, or any other key on which you want to
memorize the function to be copied.

6. The yellow light of the LEARN key will light up and stay

lit while waiting to receive a signal from the original remote
control.

7. Press the key on the original remote control corresponding

to the signal to be copied and hold it down until the
yellow light of the LEARN key goes out.

…