Meliconi Speedy 210 combo - Manual (Page 4)

10
C2. MANUAL SEARCH (DECODER)
Check that the other buttons (dark blue) correspond to the functions of the original remote control; if not,it is
likely that the code found is incorrect, but is used for a very similar device, therefore repeat the procedure
from point 2.
1. Switch on the device and select a programme.
2. Simultaneously hold down the P+ and P- buttons.
3. When the indicator light starts fl ashing, release the
buttons and briefl y press the ON/OFF STB button.
4. The indicator light fl ashes faster; the remote control is
ready for the search.
5. Point the remote control at the device. Slowly press and
release the ON/OFF STB button several times, stopping
when the decoder is switched off (you may need to press
the button several dozen times).
6. When the device has switched off press the OK button.
Three long fl ashes indicate that the operation was
completed correctly.
STB
C3. MANUAL SEARCH (DIGITAL/ANALOGUE TV)
1. Switch on the TV and select a programme.
2. Simultaneously hold down the VOL + and P+ buttons.
3. When the indicator light starts fl ashing, release the
buttons and briefl y press the ON/OFF TV button.
4. The indicator light fl ashes faster; the remote control is
ready for the search.
5. Point the remote control at the TV. Slowly press and
release the ON/OFF TV button several times, stopping
when the TV is switched off (you may need to press the
button several dozen times).
6. When the TV has switched off press the OK button. Three
long fl ashes indicate that the operation was completed
correctly.
STB
STB
TV
TV
OK
OK