Mounting and installing, Bore illustration – MEDC Weatherproof FernTel User Manual

Page 9

Text mode
Original mode

Mounting and installing

Wall version

Fasten the telephone mount with 4 screws (2). Place the provided washers Ø 18 mm under
the screw head.

Place the telephone in the upper latches (A), swing it downwards until the lower latches
audibly engage (B).
Remove the keypad plate (6), and tighten the two locking screws (3) as far as they will go.
Important: This preserves the IP65 degree of protection.
Pull the telephone line through the cable gland (4) and connect it with terminal (5) TCP/La -
TCP/Lb (TCP : Terminal Connection Point).
Use cables with a sheath diameter of 5 to 9 mm only, otherwise the IP65 degree of
protection can not be guaranteed.

Bore
illustration

(not to scale)