MEDC Weatherproof FernTel - Manual (Page 17)

17
Operation
Seize (Make / answer a call)
When you pick up the handset, you may answer a call or make a call to a conversation
partner.
Amplified listening in receiver
Press the key to increase the receiver volume during a call. Depending on the presetting,
the volume is increased in one or two steps. Pressing the key one more time reduces the
volume to the previous level.
Make a call
Dial the desired number by using the number keys. When using the dialling mode Pulse
dialling, the asterisk and hash keys have no function.
Last number redial
By pressing the last number redial key, the last entered number is automatically dialled.
Disconnect
To end a call and start a new call immediately afterwards, there is no need to put the handset
down, just press the disconnect key. When disconnecting, the old call ends, and after a short
while you hear the dialling tone. You may now enter the number for the new call.
Enquiry call (dual-tone multifrequency only)
If the telephone is connected to a private branch exchange, you may press the enquiry key R
in order to establish a connection with another subscriber, who is also connected to the
private branch exchange. By pressing this key a second time, you will be connected with the
first subscriber again.
Programming
Allow settings modifications
- Lift the handset.
- Press the * and # keys simultaneously.
- Press the # and 0 keys consecutively.
- Enter the PIN
- Press the key to allow settings modifications.
- Replace the handset.
(PIN)
Version with keypad (16 keys), without display
In order to program the telephone, you have to allow modifications of the settings.