MEDC Ex ResistTel IP2 - Manual (Page 28)

Page 28 Manual ExResistTel IP2
5 Technical Data
Connection data
Power supply Power over Ethernet refer to IEEE
802.3af or external power supply
Voltage PoE 48V DC (Min. 44V, Max. 57V). The power
has to be transmitted at 10/100 Mbit/s
Ethernet connections only with the
unused pairs of data lines.
PoE Class 0
Voltage external power supply 19.2 V – 52.8 V DC
Power requirement 12.95 W
Switching power of the relays 250 V, 5 A, 100 VA AC
230 V, 0.5 A, 100 W DC
50 V, 1 A, DC
30 V, 5 A, 100 W DC
Connection Ethernet Terminals (10/100 Mbit/s)
Ringing volume Max. 95 dB(A) in 1 m distance
Housing
Material Glass-fibre reinforced polyester
(Height x Width x Depth) without cable
screw caps and without earth bolt 267 x 225 x 132 mm
Weight ca. 6.0 kg
Display
• 182 x 64 pixel
• Field of view ca. 78 mm x 26 mm
Keypad
• Metal keypad with ice protection
• 21 keys with ABC marking
Hook switch Reed contact without mechanical switch
Operation general purpose Vertical wall mounting. The telephone
must be mounted on a closed rear panel.
Handset
Mouthpiece Electret-foil microphone
Receiver inset Dynamic receiver inset with magnetic
field generator
Sling holder Integrated adjustable sling holder
Handset cable Armed court