MEDC Ex FernTel IP - Manual (Page 13)

Manual FernTel IP Z2 UL 13
5 Technical Data
Connection data
Power supply Power over Ethernet refer to IEEE 802.3af
Voltage 48V DC (Min. 44V, Max. 57V)
Power 3,5 W
P_
PoE
” 4 W
PoE Class 0
Current I
DC_PoE
” 100 mA
Electrical ratings Rated voltage: DC 48 V
Max. input voltage: DC 57 V
Connection RJ45 Ports (10/100 Mbit/s)
LAN cable with 8 wires
AWG 22 to 24 with single wire conductor
AWG with multi wire conductor
Cable glands NPT ½”
Diameter of the connecting cable 6 – 13 mm
Connection potential equalisation 1.5 – 4 mm
2
Ringing volume Max. ca. 95 dB(A) in 1 m distance
Housing (Height x Width x Depth) 293 x 191 x 128 mm
Weight (telephone incl. telephone
mount) ca. 2.400 g
Display 128 x 64 Pixel
Keypad Illuminated keypad with stainless steel
plate
Operating utilization position Table or vertical wall mounting
Handset
Mouthpiece Electret-foil microphone
Receiver inset Dynamic receiver inset with magnetic field
generator
Environmental conditions
Ambient operating temperature -20°C…+55°C (-4°F…+131°F)
At a temperature below -10°C (14°F)
there may be a delayed reaction of the
LCD display