MEDC Ex FernTel IP - Manual (Page 3)

1 RX+ Rx+ / V- Rx+ / V+
2 RX- Rx- / V- Rx- / V+
3 TX+ Tx+ / V+ Tx / V-
4 V+ - -
5 V+ - -
6 TX+ Tx- / V+ Tx / V-
7 V- - -
8 V- - -
3
Upon connecting the cable, please make sure the exposed conductors are placed in the
plug connector and are securely fastened.
The outer terminal of the electrostatic potential compensation (17) must be connected to
the potential compensation at the place of installation, in order to avoid a dangerous electro-
static build-up in case of any electrostatic occurrence.
Marking on connection X101
The configuration of the FernTel IP Z2 / Z22 follows as described in the operating manual of
the normal FernTel IP.
Connecting and adjusting
Connect the device using an RJ45 plug in the VoIP telephone with the following normative
PoE allocation:
RJ45 plug PIN Spare-Pair supply Phantom supply
Midi-x Midi