Single & dual receiver, R ev-l ink software – Electro-Voice N/DYM 767a User Manual
Page 4
Customers also asked for the seamless integration of large numbers of wireless
systems. Factory set channel groups allow up to 16 systems to operate simultaneously
in one frequency band. Programmable in 25 kHz steps across 24 MHz operating
bandwidth, there are over 950 possible channels so you can always find a clear channel.
Advanced ClearScan™ automatic group and channel selection allows quick, simple
setup in crowded RF environments, which mitigates stress in critical, real-world
production situations.
single & dual receiver
•
Optimized analog audio path developed to provide the truest representation of a wired microphone
sound possible in a wireless system.
•
REV-Link™ PC software for remote monitoring, control and programming over a CAN bus connection
through a UCC-1 converter or Netmax N8000.
•
Factory set channel groups allow up to 16 systems to operate simultaneously in one frequency
band. For groups up to 44 systems, EV can help with the coordination and custom groups are
easily programmed.
•
Programmable in 25 kHz steps across 24 MHz operating bandwidth, there are over 950 possible
channels so you can always find a clear channel.
•
Advanced ClearScan™, automatic group and channel selections, allows quick, simple setup.
•
Backlit LCD Display shows the Sound Engineer the Group/Channel, transmitter battery status,
diversity operation, RF and Audio level meters, and space for a custom name
•
REV-D Dual Receiver includes antenna pass through jacks so up to six receivers can be connected
to just two antennas. All required cables are included.
•
Specially designed “Sound Check” mode provides the ability for one person to walk test the
microphone in the performance space with tangible results.
•
Patented DSP Posi-Phase™ Diversity System for maximum range and audio quality.
•
Combination Tone plus Amplitude squelch for maximum flexibility.
•
Balanced XLR line level output and 1/4-inch unbalanced line-level outputs adjustable from the front
panel to match the application.
•
Guitar mode matches the optimized instrument audio with the REV-BP bodypack.
•
Internal universal switching power supply, headset monitoring jack, and DC power on antenna input
jacks for optional RF amplifier
•
Integrated rack mount ears and front mount antenna cables included.
•
Three-Year Limited Warranty.
R EV-L ink software
•
Complete monitor and control of all receiver front panel functions.
•
Low battery or Low RF level alarms to alert you during a performance.
•
Run all forms of ClearScan™ to select clear channels even when mixing
frequency bands.
•
New ClearScan™ Analyzer mode allows you to sweep the entire band
and display the results like a frequency analyzer.
•
Save and recall scenes or channel settings for different locations.
•
Mute function lets you silence a noise channel at the receiver.
•
Compatible with IRIS-Net™ audio networking software so you can monitor
your wireless microphones on the same network as your EV remote amplifiers.
•
Software is included on CD-ROM with every REV receiver and updates
are available at no charge on the EV website www.electrovoice.com.