Marshall Electronics MXL UR-1 - Manual (Page 6)

6
Setup
select Control Panel.
2. Select Sounds and Audio Devices.
3. Click on the Audio tab and select USB Audio Codec as the default device for Sound playback
and Sound Recording.
4. To adjust the output volume from the computer, click on the Volume button under
Sound playback.
5. The master volume output can be changed by moving the Speaker fader up or down.
Your Windows XP computer is now set up to use the UR-1. Some recording applications will re-
quire additional settings to be changed within the program. Please see your recording software
manual for proper setup.
Initial Setup with Windows Vista ® and Windows 7 ® :
1. To select the UR-1 as the default audio device, go to the Start Menu and select
Control Panel.
2. Double click the Sound icon.
3. Select the Playback tab. Highlight the speaker icon labeled as USB Audio Device and
click the Set Default button. To make further adjustments to the playback volume and
settings, double-click on the speaker icon labeled USB Audio Device.
4. To adjust the volume from the computer, click on the tab labeled Levels. The master
volume output can be changed by moving the Speaker fader left or right.