Marshall Electronics CV350-5X - Manual (Page 7)

7
1080 HD-SDI 5X Camera
You can change the AE CONTROL mode between AUTO, MANUAL, IRIS PRIORITY,
SHUTTER PRIOROTY, and BRIGHT using the LEFT or RIGHT button.
Select a menu from BRIGHTNESS, IRIS, AGC GAIN LIMIT, SHUTTER, DSS, and
FLICKERLESS using the UP or DOWN button.
BRIGHTNESS
AE CONTROL
BRIGHTNESS, IRIS, AGC LIMIT,
SHUTTER, DSS, FLICKERNESS
IRIS
SHUTTER: Adjust the SHUTTER speed.
AGC LIMIT
DSS (SENS-UP)
MAIN MENU
WB CONTROL
AE CONTROL
FOCUS CONTROL
BACK LIGHT
IMAGE CONTROL
DISPLAY CONTROL
RESET
EXIT
ATW
INDOOR
SAVE
AE CONTROL
MODE AUTO
BRIGHTNESS IIIIIIIIIIIII 10
IRIS AUTO
AGC LIMIT IIIIIIIIIIIII 13
SHUTTER AUTO
DSS OFF
FLICKERLESS OFF
RETURN
FLICKERLESS: Use this function when you experience picture flicker,
this happens when there is a conflict with the installed lighting frequency.
0~20: Adjust the screen brightness.
MANUAL: BRIGHTNESS control is fixed, and give the AE control
priority to others.
AUTO: IRIS controls exposure automatically but SHUTTER is fixed.
0~20: Adjust the screen brightness.
MANUAL: IRIS control is fixed, and give the AE control priority to others.
0~20: Adjust the gain level.
AUTO: Shutter controls exposure automatically when iris is set to manual.
1/2~40K: Set the shutter speed from 1/2, 4, 8, 15, 30, 60, 90, 120, 150, 180,
250, 350, 500, 725, 1000, 1500, 2K, 3K, 4K, 6K, 10K, 20K, 30K, and 40K.
MANUAL: Shutter is fixed, and give the AE control priority to others.
OFF~1/2: Set the DSS level from OFF, 1/30, 1/15, 1/8, 1/4, and 1/2.
MANUAL: DSS is fixed, and give the AE control priority to others.