Phase 8 - assembly of steel frame (element 7) – MCZ Mondrian User Manual
Page 14
INSTALLATION AND USE MANUAL
Chapter 3
MONDRIAN
page
14
Chapter 3
Technical service – all rights reserved by mcz spa
Reproduction prohibited
3.9. PHASE 8 - ASSEMBLY OF STEEL FRAME (element 7)
The steel frame is simply inserted into the marble Base and the support frame.
The two pins on the lower side of the steel frame must enter completely into the holes in the marble base. The
steelframe must rest on and close against the top of the base. If necessary add marble cement to prevent small
movements of the pins in the holes. At the same time, the inside bend of the steel frame must rest on the frame
support (see drawing).