MCZ Flux HYDRO - Manual (Page 41)

39
ON
OFF
8 - ELECTRICAL CONNECTION
Technical Dept. - All rights reserved - Reproduction is prohibited
ELECTRICAL CONNECTION
Connect the supply cable coming from the circuit board to an electrical wall socket.
The main switch must only be activated to switch the stove on; otherwise, it is advisable to keep it switched off.
It is recommended to disconnect the power cable when the stove is not used.
STOVE POWER SUPPLY
Once the supply cable has been connected, turn the switch, which is situated on the left side in the circuit board panel, to position “I” (ON).
The switch on the stove is used to power the system.