Epson P-7000 - Manual (Page 8)

8 Getting Started
c
Caution:
❏ Disconnect the AC adapter before removing the
battery.
❏ Do not connect the AC adapter when the battery is
not installed. Doing so may cause damage to the
viewer.
❏ If the Charge lamp lights orange, see
“Troubleshooting” on page 28.
Turning the power on/off
Make sure the battery is inserted.
Slide the power switch to . The Illumination lamp
turns on.
To turn the power off, slide the power switch to and
hold down until the shut down display appears.
Preventing key operations
Slide the power switch to Hold.
To release Hold, slide the power switch back to the
middle.
Initial settings
When you turn on the viewer for the first time, the
setting screen appears.
Set the language, date, and time.
Illumination lamp