Epson DFX-9000 - Manual (Page 14)

14 Printer Software
Printer Font
Setting Select a character table group to use. You can select
one of three character table groups, Standard,
Expanded, and None (Bit Image printing).
When Standard or Expanded is selected, the printer
uses the device fonts. Expanded includes more fonts
than Standard.
When None is selected, the printer uses bit map
images instead of the device fonts.
For details on the fonts which are included in each
table, see your printer's documentation.
Print Text as
Graphics* Select Off when the printer uses the device fonts and
select On when the printer does not use the device
fonts.
Metafile
Spooling* Select whether to use EMF spooling.
Paper Order* Select whether to print from front to back or back to
front.
Pages Per Sheet* Select the number of pages that you want to print
onto a single page.
Copy Count* When you select more than one in the Number of
copies box, this check box appears and you can
select whether to collate the pages of the copies.
Advanced
Printing Features* Select Enable or Disable for the metafile Spooling.
Print
Optimizations* Select Disable when the printer does not use the
device fonts and select Enable when the printer uses
the device fonts.
Color Select whether to use color printing. To use color
printing, you have to install the optional color upgrade
kit.
Printable Area If Standard is selected, the normal printable area for
Epson impact printers is used.
If Maximum is selected, the printer's maximum
printable area is used.
Settings Explanations