Encore electronic ENNHD-1GS User Manual
Page 22
6. You may select “Auto assign IP Address”, which allows the PNMD to assign IP
addresses for the device, or select “Use the IP Address as below”, fill in IP
address for this device. Enter the username and password and click OK.
Note:
The default username/ password is admin/ admin. To get information modifying the
username and password, see “Administrator- Administrator Setting”
7. After successful IP address setting, the PNMD rescans NAS in your LAN
automatically.
8. Select your NAS. You may:
z
Click the
button to access to folders in the NAS or
z
Click the
button. Fill in the username and password and click
OK to open the GUI interface.
Note: To get instructions using the GUI, please see “Using the Graphic User
Interface (GUI)”
21