Eiki EIP-X350 - Manual (Page 23)

EN-22
Setup Menu
Keystone
Adjusts image distortion caused by tilting projection.
Reset keystone
Resets the keystone correction to zero (no correction).
Volume
Adjusts the loudness of the projector’s audio.
Mute
Temporarily turns off the projector’s audio.
Projector position
Adjusts the picture to match the orientation of the projector: upright or upside-down, in
front of or behind the screen. Inverts or reverses the image accordingly.
Lamp saver
Sets a lower power level for the lamp.
Language
Selects the language used by the on-screen menu.
Hide
Hides the screen and mutes the sound.
Advanced setup
Adjusts additional setup settings.
„
Power timeout
Sets the length of time the projector waits for an input signal before automatically
shutting down.
„
Clean edges
Enlarges and clips video images to remove noise from picture edges.
„
Timeout for menu
Sets how many seconds the on-screen menu waits for input before it closes.
„
Horizontal size
Fine-tunes the width of the image for multi-projector setups.
„
Reset lamp hours
For a new lamp, resets the hours of use.
„
Projector lock
Sets or cancels a secret button sequence that must be entered for the projector to
operate.
„
Reset all settings
Restores all menu settings to factory default settings.