Electrolux Convection Microwave Oven PN316902496 - Manual (Page 12)

12
Before operating
• Before operating your new Convection micro-
wave oven make sure you read and understand
this Use and Care Guide completely.
• Before the Convection microwave oven can be
used, follow these procedures:
1. Plug in the oven. Close the door. The oven display
will show ENJOY YOUR OVEN TOUCH CLEAR
AND TOUCH CLOCK.
2. Touch the STOP/CLEAR pad. : will appear.
3. Set clock. See below.
To set the clock
• Suppose you want to enter the correct time of
day 12:30 (A.m. or P.m.).
Procedure
Step Touch/Display
1. Touch set clock.
enter tIMe
2. Enter the correct time of
day by touching the
numbers in sequence.
1230
12:30
tOUCH CLOCK
3. Touch set clock again.
12:30
This is a 12 hour clock. If you attempt to enter an
incorrect clock time,
ERROR will appear in the
display. Touch the STOP/CLEAR pad and re-enter
the time.
• If the electrical power supply to your Convection
microwave oven should be interrupted, the dis-
play will intermittently show
ENJOY YOUR OVEN
TOUCH CLEAR AND TOUCH CLOCK after the
power is reinstated. If this occurs during cooking,
the program will be erased. The time of day will
also be erased. Simply touch
STOP/CLEAR pad
and reset the clock for the correct time of day.
NOTE
Your Convection microwave oven can be pro-
grammed with the door open except for
START,
popcorn and reheat.
Stop/Clear
Touch the STOP/CLEAR to:
1. Erase if you make a mistake during
programming.
2. Cancel timer.
3. Stop the oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.
E