Emerson EWC09D5 B - Manual (Page 21)

– 21 – EN – 21 – – 21 – – 21 – – 21 – – 21 –
TRACK SEARCH
There are three ways to begin playback on an Audio
CD at a specific track.
Using the Number buttons
1 Press the Number buttons to enter the
desired Track Number.
¡ Playback will start at the selected track.
¡ For single digit tracks (1-9), hit a single number (eg.
track 3, hit [3]).
¡ To play track 26, hit [+10], [2], [6].
Using [SEARCH MODE]
1 Hit [SEARCH MODE].
¡ The Track search display appears.
2 Within 30 seconds, select a desired track
number using the Number buttons.
¡ For single digits hit [0] first, if the total track of the
disc is more than 10.
¡ Playback will start at the selected track.
Using [SKIP H / G]
During playback, hit [SKIP G
G ] to move the next
track. Hit it repeatedly to skip subsequent tracks. Hit
[SKIP H
H ] to go back to beginning of the current
track. Hit it repeatedly to go to the previous tracks.
¡ If [SKIP H H / G G ] is pressed while the playback is
paused, the playback will be paused again after skip-
ping to the next track.
NOTE:
¡ [SKIP H H / G G ] are not operative when playback
is stopped.
CD
TITLE / CHAPTER SEARCH
1 Hit [SEARCH MODE] once for the Chapter
search, twice for the Title search during
playback.
2 Enter the desired chapter/title number using
the Number buttons.
¡ Playback will start at the selected chapter or title.
¡ Hit [CLEAR] to erase the incorrect input.
¡ For single digits hit [0] first, if the total chapter or
title of the disc is more than 10.
DVD-V
_ /2
TIME SEARCH
1 During playback, hit [SEARCH MODE] three
times (CD: twice) to display the Time Search
on the TV screen.
2 Within 30 seconds, enter a desired disc
time using the Number buttons.
¡ Playback will start at the specified time.
¡ Hit [CLEAR] to erase the incorrect input.
¡ When there is no need to enter a number, “0”
appears automatically. For example, “ 0 : 0 - : - -”
appears in the Time Search display if the total time
of the track or title is less than 10 minutes.
CD DVD-V
SEARCH FUNCTION
MARKER SETUP SCREEN
Use markers to memorize your favorite places on a
disc.
1 Hit [SEARCH MODE] four times (CD: three
times) during playback.
¡ The display screen and Markers will appear on the
TV screen.
2 Press [s / B] to select 1, 2, 3, 4, 5, 6, 7, 8, 9,
or 10 and ensure that “- - - - : - - : - -”
appears in the display.
3 When you reach the desired point, hit
[ENTER].
¡ The title or track and elapsed playing time will
appear in the TV screen.
4 To return to the Marker later, hit [SEARCH
MODE] four times (CD: three times) during
playback and [s / B] to choose the desired
marker, then hit [ENTER].
NOTES:
¡ Operations which erase all Markers:
– Opening the disc tray
– Turning off the power
– Hitting [SELECT]
– Selecting “AC” at step 2 and hitting [ENTER]
¡ To clear a marker:
– Press [s / B], position the cursor on to the mark-
er number and hit [CLEAR].
¡ You can mark up to 10 points.
5 Press [SEARCH MODE] or [RETURN] to exit.
CD DVD-V