Powerfix PMA25A1 - Manual (Page 50)

Multipower Light Battery LED PMA25A1
English - 49
Charging via the Car Adapter
Make sure that your vehicle has a 12V battery.
Never connect the car adapter to a 24V
battery.
ƒ Remove the protective cover from the jack [4] of
the flashlight.
ƒ Insert the small connector from the car charging
adapter [C] into the jack [4] on the flashlight.
ƒ Then connect the car adapter [C] to a suitable
cigarette lighter in your car. During charging the
charge indicator [2] will light red.
ƒ A full charging cycle takes at least 4 hours. Then
unplug the car adapter [C] from the cigarette
lighter.
Powering the Flashlight On/Off
This flashlight features three different lamps. You
can switch the suitable light operation mode for
each application.
The Halogen Lamp
ƒ Slide the mode selector switch [7] to the
“HALOGEN” position.
ƒ Press the trigger button [6] to power the flashlight
on.
ƒ Release the trigger button [6] to power the
flashlight off.