Powerfix Z30590-BS - Manual (Page 44)

44 GB/MT
Use
Q
Use
m When using the LED work lamp in a vehicle make sure that you do
not endanger the driver or the passengers. Store and secure the
LED work lamp in such a way that, even under conditions of full
braking, there is no danger of damage to the product or personal
injury.
j Fully charge the rechargeable batteries for the LED work lamp as
described in the section called “Recharging the rechargeable
batteries for the LED work lamp”.
j Press the on / off switch 4 (position I) to switch the LED work lamp on.
Q
Using the LED work lamp connected to a
power supply
m Arrange the power lead so that it does not create a trip hazard.
m cAUtIOn DAnGEr OF AccIDEnt! Do not connect or use
the LED work lamp if you are in moving traffic, for example driving
a vehicle. The LED work lamp is not a passenger compartment
light or a reading light!
j Pull the protective rubber pad 5 out of the bottom of the
LED work lamp handle.
j Insert the connection plug of the mains adapter 2 or the connection
plug of the cigarette lighter socket adapter 3 into the connection
socket in the LED work lamp handle.
j Insert the mains adapter 2 into a 230 V ~ mains socket or insert
the cigarette lighter socket adapter 3 into the cigarette lighter
socket in your vehicle.
j Press the On / Off switch 4 to switch on the LED work lamp.