8sza 28 b2 – Silvercrest SZA 28 B2 User Manual

Page 11

SZA 28 B2

DANGER

►

When drilling the holes ensure that any electric cables or other installa-
tions in the wall, such as water pipes, are not damaged.

NOTE

►

When mounting on a wall, the reception quality should be tested
beforehand as the indoor aerial

can no longer be re-aligned to

improve reception once it has been mounted.

♦

Use a pencil and spirit level to make a vertical or horizontal line on the
wall.

♦

Mark the position for the two necessary drill holes (8 cm apart) on the
line with the help of the wall mount

and drill two holes for the supplied

wall plugs (6 mm).

♦

Place the wall plugs in the drillholes and screw in the screws until they
project about 5 mm out of the wall.

♦

Place the wall mount

in the holes designed for this purpose on the rear

of the device (see Fig. C) and click it into place.

Fig.

♦

Hang the indoor aerial

on the screw heads and check that it sits ﬁ rmly.

IB_93403_SZA28B2_LB4.indb 8

05.12.13 11:35