Elmo Ceiling Presenter HV-C1000XG - Manual (Page 10)

11
9
1
2
3
4
5
6
7
8
9
10
Connector Panel
Mouse
Terminal
[MOUSE]
USB Terminal
[USB]
Video-out Terminal [S-VIDEO/VIDEO]
S-Video (Mini DIN 4P)
Composite Video (RCA pin jack)
RS-232C Terminal
[RS-232C]
Analog RGB-out
Terminal [RGB OUT]
DIP Switches
Power Cord
Receptacle[AC IN]
Power Supply Switch
[POWER]
A BCD
0
1
Name Function Reference Page
1
2
4
3
5
6
P.32
P.15
P.13
P.26
P.14 P.15
P.15
Mouse Terminal [MOUSE]
USB Terminal [USB]
Video-out Terminal
[S-VIDEO/VIDEO]
S-Video (Mini DIN 4P)
Composite Video
(RCA pin jack)
RS-232C Terminal
[RS-232C]
Analog RGB-out
Terminal
[RGB OUT]
To connect the mouse (supplied accessory)(*1).
If connected to personal computer with
the attached USB cable, it is possible to
transfer images and control the unit by
using the software in the attached Utility
Software CD-ROM.(*1)
To output images to the NTSC/PAL
monitor, such as TV monitor.
Image is output when this terminal is
connected to RGB input equipment
(e.g., LCD projector, multi-sync monitor).
To connect the RS-232C cable when
controlling the unit from the PC.
DIP Switches
0
[A] key
Over scan
Key alignment and functions:
Under scan
NTSC
PAL
[B] key [D] key [C] key
1
The functions can be changed as follows:
◊[A] key: To change the video output type.
◊[B] key: To change the screen size of video output.
◊ [C] key: Selects the operating range of AF.
◊ [D] key: Selects the operating range of AF.
Before changing the DIP Switch keys, be
sure to turn OFF the power supply to this
product.
AF range selected
(See P. 14.)
(*1) For cable extension, use a cable specified for extension that is commercially available.