Enviro Sienna Indoor Gas Fireplace - Manual (Page 21)

21
Secondary Installation
L
OG
S
ET AND
E
MBER
I
NSTALLATION
:
NOTE: The logs are fragile and should be handled gently.
The placement of the logs is not arbitrary. If they are positioned incorrectly, the flames can be “pinched”
and will not burn correctly. The burner, and a few of the logs come with locator pins, notches and ledges,
which make alignment easier. Using the pictures provided, carefully set the logs in place (see Figures 30
through 35).
Figure 30. Empty firebox with grate and locator pins.
Figure 31. First Stage Log Set Installation.
Figure 32. Second Stage Log Set Installation.
Figure 31: The left log and
the right log both have two
(2) holes in them that will rest
over their corresponding two
(2) locator pins pointed out in
Figure 30.
Figure 32: The bottom of the
left/center log will rest over
the locator pin on the burner
and against the grate. The top
half of the log must rest against
the back log, see Figure 31. The
center spot shown in Figure 31
is a knot in the back log for the
left/center log to rest against.
Ensure the log does not block
any burn ports.
Figure 30: The first log to
be placed is the back log.
It leans on the back of the
firebox, push it back as far
back as you can.