Silvercrest SRL 100 A1 - Manual (Page 30)

GB MT
30
Operating Instructions SRL 100 A1-51/2013-1.05
Manufacturer
Luxoplast Kunststofftechnik GmbH,
Wernher-von-Braun-Str. 3 - 5,
84539 Ampfing
in Germany
Electrical Properties
Rated voltage 230 V~
Nominal power max. 100 W
consumption
Rated frequency
50 Hz
Important Information! Please retain these instructions!
Please read through the operating instructions carefully, particularly the
safety instructions, before using the appliance and please retain the ope-
rating instructions for further use. If the appliance is passed on to a third
party, please ensure you provide the user with these operating instructions.
The Appliance
View of the unit, see page 2:
A Infrared lamp
B Lamp housing
C Lamp stand
D Mains cable
Contens
The Appliance ..................................... 30
Manufacturer ....................................... 30
Electrical Properties ............................ 30
General Safety Precautions ................ 31
Special Safety Precautions ................. 33
Intended Use ....................................... 34
Introduction ......................................... 34
Initial Use ............................................. 34
Heat treatment with infrared light ........ 35
Caring for Your Appearance ............... 35
Important for the Sportsman ............... 35
When Should I Seek Medical Advice? 35
Cleaning .............................................. 36
Lamp Durability ................................... 36
Changing the Bulb ............................... 36
Ambient Conditions for
Transport/Storage ............................... 36
Repairing Possible Faults ................... 37
Disposal ............................................... 37
WARRANTY ....................................... 38
Warranty card ...................................... 38
General Safety
Precautions
Always disconnect the plug
from the mains socket in
the event of faults, when
changing the bulb, before
cleaning and when the
appliance is not in use.
Never pull on the mains
cable! Always disconnect
the appliance from the
power socket. Do not touch
the lamp during operation or
without first allowing a suf-
ficient cooling period. Never
immerse the appliance in
water and do not allow it to
come into contact with rain
or other moisture! Should
the appliance fall into water,
disconnect the plug from
the mains socket before
removing the appliance from
the water. Afterwards, do
not use the appliance again
before it has been checked
by a member of authorised
customer service person-
nel. This also applies if the
mains cable or the appliance
has fallen or been dropped.
Place the appliance on a
stable, level surface. Ensure
an area of at least 80 cm of
free space around the unit in
order to avoid overheating.
Protective category II unit
This symbol means that the
unit is double insulated.
These operating instructions
belong to this appliance.
Please read thoroughly.
This symbol means that it
offers information about how
to use the unit correctly.
Danger warning symbol –
draws attention to risk of
personal injury.
Caution warning symbol –
draws attention to risk of
material damage.
LOT symbol with a four-digit
number represents the date
of production.
An explanation of these
symbols can be found in the
Disposal section of the
instructions for use.
Type B application
component
a) Caution
b) Hot Surface/
Burn Hazard
Manufacturer
a)
b)
Explanation of symbols
Danger
Danger
Caution
Number