Adjusting the appearance of the picture – Epson CPD-17904 User Manual

Page 18

3. Press the up or down arrow button on the remote control or the

button on the

projector to move through the list of options. When the option you want to change is
highlighted, press the

Select

button.

You may see a list of settings, a submenu providing additional options, or a line menu or
slider bar similar to the one below:

4. If you see a list of settings, use the arrow buttons on the remote control or the

button on the projector to move to the setting you want, then press the

Select

button.

Enabled settings are indicated by a green light, while disabled ones are gray.

If an option has a submenu, press the

Select

button to display it, then select the setting

you want.

If you see a line menu or slider bar, press the left or right arrow button on the remote
control or the

button on the projector to change the setting.

5. Press the

Esc

button to return to the previous menu.

6. Press the

button to exit the menu system.

Adjusting the Appearance of the Picture

The Image menu lets you make a variety of adjustments to the projected image to get the best
color and quality.

The options available depend on which type of equipment is connected to the projector:

Image menu for component video,
composite video, or S-video

Image menu for computer
or RGB video