Epson CPD-17904 - Manual (Page 16)

16
Adjusting the Volume
Use the control panel to adjust the volume of the projector’s audio system or speakers
connected directly to the projector’s
Audio ports:
■ Press the button to decrease the volume.
■ Press the button to increase the volume.
Turning Off the Picture and Sound
You can use the A/V Mute button on the remote control to darken your screen and turn off
the sound. This is useful if you pause the video.
■ To turn off the picture and sound, press the A/V Mute button. The screen goes dark.
■ To turn the picture and sound back on, press the A/V Mute button again.
Use your video device’s controls to pause the video. If you don’t pause it, it continues to play
even though you don’t see or hear it. When you press the
A/V Mute button again, playback
won’t resume where you stopped it.
Freezing the Action
To freeze the action temporarily on the screen, press the Still button on the remote control.
This freezes any moving images until you press the Still button again.
Like the A/V Mute feature, the video and audio input continue while the moving images are
paused, so when you press the Still button again, playback doesn’t resume exactly where you
stopped it.