Enfora GSM2228UG001 - Manual (Page 41)

Mini-MT User Guide
Revision 1.02
GSM2228UG001 Page 32
8.5.3 Configure the Modem to Access the GPRS network.
De-register the Mini-MT from the network using the following command:
AT+CFUN=0
Set the modem with the proper APN (Access Point Name) using the following command:
AT+CGDCONT=1,”IP”,”APN”
NOTE: Replace the letters “APN” with the APN that was provided to
you by your wireless carrier
Example:
AT+CGDCONT=1, “IP”, “isp.cingular”
Set the username and password with the following command:
AT%CGPCO=1, “,”,0
NOTE: Substitute the correct username and password, if your cellular
carrier requires a username and password.
Example:
AT%CGPCO=1, “[email protected],CINGULAR1”,0
Configure the Mini-MT for auto GPRS registration with the following command:
AT$AREG=2
Save the changes to memory with the following command:
AT&W
The Mini-MT should be reset to ensure the changes are used. Reset the Mini-MT with
the following command:
AT$RESET