Enfora GSM2228UG001 User Manual
Page 21
Mini-MT User Guide
Revision 1.02
GSM2228UG001 Page 12
For charging the Mini-MT battery in a vehicle an optional USB to vehicle accessory
power adapter is available (PSA-9000-0002).
NOTE: Many vehicles do not provide power to the accessory jack when the
vehicle ignition is off.
An alternate method for charging using AC power may be performed with the AC power
to USB power adapter (PSA-9000- 0101).
Connect one end of the USB cable to the Mini-MT and the other end to your power
source. The Mini-MT ON LED will be on solid and the BAT LED will flash while
charging.
When the Mini-MT is fully charged the BAT LED will be off and the ON LED will be on
solid while connected to a USB power source.
NOTE: The USB cable needs to support 480 mA.