Silvercrest SDR 1500 A1 - Manual (Page 18)

18 English
 The orange indicator lamp (A3) goes
out after approximately 7 minutes.
The steam cleaner is ready to use.
 Disconnect the mains plug (A7) from
the socket.
 Illustration
– Put the extension pipes (E1) into the
large acessory compartments (A5).
– Insert the manual nozzle (D1) and detail
nozzle (C1) onto each extension pipe.
– Put the round brush (C2) into the medi-
um acessory compartments.
– Hook the floor nozzle (F1) into the park-
ing holder (A6).
– Wrap the steam hose (B5) around the
extension pipes and insert the steam
pistol (B1) into the floor nozzle (F1).
Prior to treatment with the steam cleaner,
always check the reaction of the textiles in
an inconspicuous location: Steam at first,
then let dry and then check for colour or
shape changes.
When cleaning painted or plastic-coated
surfaces, as found on kitchen and living
room furniture, doors, parquet; wax, furni-
ture polish, plastic surfaces or paint can
come loose or stains can be created. When
cleaning these surfaces, briefly steam a
cloth and wipe the surfaces with it.
Caution
Never direct the steam jet at glued edges
as the edge band may loosen. Do not use
the steam cleaner on unsealed wooden or
parquet floors.
In case of low outside temperatures, espe-
cially in the winter, warm up the window
pane by slightly steaming the entire glass
surface. This will prevent tensions on the
surface which might lead to glass break-
age.
Caution
Do not direct steam onto the sealed loca-
tions of the window frame to prevent dam-
age.
You can use the steam gun without any ad-
ditional accessories, e.g.:
– to remove odours and wrinkles from
hanging clothes by steaming them at a
distance of 10 to 20 cm.
– to remove dust from plants. Here, keep
a distance of 20-40 cm.
– for moist dusting, by briefly steaming
the cloth and wiping the furniture with it.
The closer this nozzle is to the contaminat-
ed area, the higher the cleaning effect, as
the temperature and the steam are highest
at the nozzle output. Especially suited for
cleaning difficult access locations, joints,
fittings, drains, sinks, toilets, blinds and
heaters. Heavy limescale can be drenched
in vinegar prior to steam-cleaning. Let the
vinegar penetrate for about 5 minutes.
The round brush can be installed onto the
detail nozzle as an accessory. Attached
brushes can therefore be used to remove
heavy soiling.
Caution
Not suited for the cleaning of sensitive sur-
faces.
Turning Off the Appliance
Storing the Appliance
How to Use the Accessories
Important application instructions
Refreshing textiles
Cleaning of Coated or Lacquered
Surfaces
Cleaning of Glass
Steam gun (B1)
Detail nozzle (C1)
Round brush (C2)