Silvercrest SSR 1080 B2 - Manual (Page 94)

Satellite Receiver SSR 1080 B2
English - 92
Time Setting
Time Setting
Auto Date and time are set automatically based on the time
zone.
Manual You can enter the date and time using the numeric
buttons here (20).
Summer Time
Here you can use the “Auto” setting to enable the automatic
daylight saving function for your region. Once you have enabled
automatic Summer time for your region, you won't need to re-adjust
the time for summer or winter.
The “On” and “Off” options are used to set daylight saving times
manually.
This function is available only if the “Time Setting” option is set to
“Auto”.
Time Zone
You can set the time zone for –12 to +12 hours offset via the  or
 navigation buttons (26) here.
Select GMT + 00:00 for Western European time.
GMT is short for Greenwich Mean Time and is the reference value
for the different time zones.
This function is available only if the “Time Setting” option is set to
“Auto”.
Date
You can enter the date via the numeric buttons (20) here. However,
this is only possible after you have set the “Time Setting” option to
“Manual”.
Time
You can enter the time via the numeric buttons (20) here. However,
this is only possible after you have set the “Time Setting” option to
“Manual”.
Parental Control
You can protect the menu from unauthorised access. This means it
can only be accessed by entering a 4-digit password. The factory-
default password is: 0000.
Change Password
To change the preset password, press the OK/ENTER button (25)
and enter a new password. Next confirm the new password. Please
make sure you remember the password or keep it in a safe place.
Menu Lock
To protect the OSD menu, set the Menu Lock to “On”. If you do not
wish to password-protect the menu, select “Off”.