Introduction, Intended use, Package contents – Silvercrest SSR 1080 B2 User Manual
Page 75: Technical specifications

Satellite Receiver SSR 1080 B2
73 - English
Introduction
Thank you for purchasing this SilverCrest SSR 1080 B2 satellite receiver. The SilverCrest SSR 1080 B2 is a pure digital receiver for receiving
unscrambled satellite programmes. It requires a digital-enabled satellite antenna. This satellite receiver features a high-end HDMI output for connecting
to plasma, LCD or LED TV sets. The digital video signal offers optimum picture quality. You will clearly notice enhanced sharpness and depth compared
to signals transferred via a conventional SCART (Euro AV) connection. The device also features a PCMCIA-compliant CI slot for inserting CI/CI+
modules.
Intended Use
This is a consumer electronics device. It requires a digital-enabled satellite antenna. It may only be used for private use, not for industrial or commercial
purposes. Furthermore, the device may not be used outdoors or in tropical climates. Only cables and external devices that comply with safety
standards and the electromagnetic compatibility and shielding quality of this device may be used. This device complies with all aspects of EC
Conformity, relevant norms and standards. Any modifications to the device may result in these directives no longer being met. The manufacturer is not
liable for any damage or interference resulting from non-compliance with the above instructions. Only use the accessories recommended by the
manufacturer. Any use other than that mentioned above does not correspond to the intended use.
If you are not using the device within the Republic of Germany, you must observe the regulations and laws in the country of use.
Package Contents
Please check that delivery contents are complete using this list:
-
SilverCrest SSR 1080 B2Digital HD Satellite Receiver
-
Remote control
-
2 AAA branded batteries, 1.5V (Micro)
-
This User Manual
If you find any items missing or damaged, please phone our hotline. The number can be found in the last chapter, “Warranty and Service Information“.
Technical Specifications
General
Dimensions (W x H x D)
260 x 50 x 230 mm
Weight
approx. 1.3 kg
Operating temperature
5 ºC to 35 ºC
Operating humidity
max. 75 % rel. humidity
Input voltage
230V AC / 50 Hz
Power consumption
Standby
< 1 W
Powered on max. 23 W
Programme presets
5000
Display 4-digit
Teletext
800 pages storage capacity
Common Interface
CI / CI+
Timers
max. 10 events
Tuner
SAT IF input
950 MHz to 2,150 MHz
Impedance 75
Ohms
Input
F connector jack
Output
F connector jack