Handling and operation, Switching the device on and off, Automatic switch-off – Silvercrest SUP 128 A1 User Manual
Page 17: Vinyl record operation, Gb ie
14
SUP 128 A1
GB
IE
Handling and operation
This section provides you with important information on handling and using
the device.
Switching the device on and off
♦
To switch the device on, press the ON/OFF button .
♦
The POWER "On" lamp comes on and PHONO operating mode appears
on the display .
♦
To switch off the device press the ON/OFF button again.
Automatic switch-off
The device has an automatic switch-off function and will turn itself off after
15 minutes of inactivity.
♦
To switch the device back on, press the ON/OFF button twice.
Vinyl record operation
Starting playback of vinyl records
♦
Use the PHONO or
button to select the operating mode for vinyl
record playback. The display will read PHONO.
♦
Open the dust cover .
♦
Place the record onto the turntable .
NOTE
►
Make sure that the record is clean and free of dust. Appropriate record-
cleaning brushes and cloths in are available from specialist retailers.
►
Use the adapter to play records with a large centre hole (singles).
♦
Use the turntable speed selection switch to set the required rotation speed.
NOTE
►
On most records, the rotation speed is printed on the record label.
♦
Remove the protective cap from the stylus .
♦
Release the arm rest clip from the pickup arm .
IB_60308_SUP128A1_LB3.indb 14
08.04.14 09:32