Silvercrest STMS 2017 A1 - Manual (Page 16)

English Wireless keyboard with wireless mouse STMS 2017 A1
14
The Wristpad
If necessary, you can attach the supplied wristpad to the bottom of the keyboard. Turn the wireless
keyboard and the wristpad upside down. Preferably lay a cloth under it to avoid any damage.

Carefully slide one part of the first clip into the hole on the bottom of the keyboard by applying
slight pressure only (see the following figure on the left).

Release the pressure so that the other side of the clip clicks into the hole (see the following
figure in the middle).

The second clip is now positioned in front of the other hole. Press the clip of the wristpad
carefully into the hole (see the following figure on the right). The clips will release and click into
the hole.
To release the wristpad, turn the wireless keyboard over with the wristpad upside down. Preferably lay a
cloth under it to avoid any damage.

Carefully swivel the wristpad upwards (towards the bottom of the wireless keyboard) by slightly
pulling it at the same time. The clips will release from their holes.