Silvercrest STMS 2017 A1 - Manual (Page 13)

Wireless keyboard with wireless mouse STMS 2017 A1 English
11
Before Getting Started
Unpack all the devices and use the package contents checklist on page 4 to verify that you have received
all items listed.
Inserting the Batteries
Insert the batteries into the wireless keyboard and wireless mouse as shown in the following figures. Take
care to insert the batteries into the device observing the correct polarity (+ and – ) The correct polarity is
labelled on the batteries and inside the battery compartment.
Fig.: Detailed view of bottom of the keyboard

Open the battery compartment of the wireless mouse and insert the batteries. Then close the
battery compartment.

Remove the bottom part of the wireless mouse. To do this, press the unlock button (14) on the
back of the wireless mouse. The lock will release and you can open and remove the bottom
part.

Insert the batteries.

Remove the USB nano receiver (C) from its storage compartment (17).

Close the wireless mouse. To do this, insert the noses on the bottom part into the hole located
on the front of the wireless mouse. Then close the bottom part on the wireless mouse until the
unlock button (14) clicks into place.

Press the On/Off switch (15) to position "ON" to power the wireless mouse on.