Silvercrest SRW 250 A2 - Manual (Page 84)

SRW 250 A2 Alarm Clock Radio
82 - English
Troubleshooting
Device will not switch on.
 Power socket defective or fuse blown: check the power socket by
connecting a different device.
No sound
 If the sound is very low or there is no sound at all, double-check the
volume setting (the device needs to be powered on) and, if
necessary, increase the volume by pressing the + button [8] several
times.
Poor radio reception
 Extend the wire aerial [12] fully and change its position if necessary.
No playback of external audio sources
 Make sure that the audio cable is firmly connected to the alarm clock
radio AUX input [16] and to the external device headphones jack.
 Make sure to select the external audio source by checking the “AUH”
indication on the display. The display indication “AUH” means
“AUXILIARY”.
 Make sure that playback is started on the external audio source and
that its volume is sufficiently high. Please also read the operating
instructions of the external device.