Silvercrest SRW 250 A2 - Manual (Page 82)

SRW 250 A2 Alarm Clock Radio
80 - English
Display Brightness
The display is set to maximum brightness on delivery. To adjust the display
brightness, proceed as follows:
 Press the TIME/DIMMER button [1] quickly to dim the display. “L”
(LOW) is shown briefly on the display [10].
 Quickly press the TIME/DIMMER button [1] again to dim the display
brightness automatically as a function of the ambient lighting. The
lightning conditions are measured by the light sensor [11]. “A”
(AUTOMATIC) is briefly shown on the display [10].
 Briefly press the TIME/DIMMER button [1] once again to set the
display brightness back to maximum. “H” (HIGH) is briefly shown on
the display [10].
 Pressing the TIME/DIMMER [1] button again allows you to repeat the
display brightness setting in the above sequence.
Light for orientation at night
The alarm clock radio has a light for orientation at night that helps you to
orientate in darkness. It also allows operating the alarm clock radio more
easily when it is dark. While the device is powered off, press the
SNOOZE/LIGHT button [9] to switch the light for orientation at night on.
Press the SNOOZE/LIGHT button [9] again to switch the light for
orientation at night back off.
The light for orientation at night built into the alarm clock
radio is not suitable for room lightning.