Vacuuming the tube ﬁ lm – Silvercrest SFS 150 B3 User Manual

Page 79

SFS 150 B3

IMPORTANT

If the indication lamp

does not extinguish after 10 seconds

at the most, the appliance is defective!

►

Immediately remove the plug from the mains power socket. Do not attempt
to repair the appliance yourself. In this case, contact Customer Services.

♦

Open the appliance lid and remove the bag. This is now sealed at one end.

NOTICE

►

Check to ensure that the sealing seam is in order. A correct sealing seam
should be a smooth, straight strip without folds.

♦

Fill the bag. You must leave at least 6 cm free to the bag-edge that is to be
sealed.

IMPORTANT

►

Fill the bags in such a way that, under no circumstances, food remnants or
ﬂ uids can run out of the bag when sealing it and permeate into the appliance.

♦

If you do not want to vacuum seal the bag you can now seal the open side.

Vacuuming the tube ﬁ lm

When sealing, you can at the same time extract the air from the bag (vacuuming):

IMPORTANT

►

Do NOT vacuum bags in which there are liquids. They will permeate into
the appliance and damage it.

♦

Place the open end of the bag around the suction connectors

. For

this you can lift them slightly. The bag needs to extend up to the marking
"Vacuum", which is marked on the appliance.

IB_71770_SFS150B3_LB1.indb Abs2:77

15.02.12 13:20