Silvercrest COCOON 1450 - Manual (Page 37)

35
Cocoon 1450 Answering machine
ENGLISH
– go to the beginning of the current message by pressing once.
– go to the previous message by pressing twice.
– cancel playback by pressing .
– interrupt playback by pressing . Press again to restart playback.
– go to the next message by pressing .
9.10 Delete messages
9.10.1 Deleting messages one at a time during playback
Start message playback as explained above.
1. Press ‘Delete’ 14 when the message you wish to delete begins.
9.10.2 Delete all old messages
You can also delete all the messages you have listened to at once. This erases only the
messages that have already been heard. New messages are not erased.
1. Press 2 .
2. Press 3 or 11 repeatedly, select ‘Ans machine’.
3. Press 2 to confirm.
4. Press 3 or 11 repeatedly, select ‘Delete Msgs’.
5. Press 2 to confirm.
6. Press 2 to confirm your selection or press 14 to quit the menu.
9.11 Clear full memory
When the memory is full ‘Memory Full’ appears in the display. If the answering machine
is switched on and a call is received, the machine will automatically play OGM 2
(answering machine function without recording a caller message).
1. Erase all the messages after listening to them.
•
The memory is free again.
9.12 Operating the answering machine remotely
The answering machine can only be operated remotely using a touch-tone
telephone (DTMF).
1. Call your machine.
•
The answering machine picks up the call, you hear the outgoing message and a beep.
2. Key ‘
*
’ twice.
• You hear a voice asking you to enter the VIP code.
3. Key in the VIP code slowly (default: 321).
•
You will hear a short beep as confirmation.
4. Enter the codes below to use the function you require:
a) Listening to messages
ß Press ‘2’ (listen to messages).
The answering machine will play the messages.
You can choose from the following options by pressing a key during playback:
ß key ‘2’ to stop playback.
ß key ‘2’ again to continue playback.
ß key ‘3’ to jump to the next message.
ß key ‘1’ to jump back to the previous message.