Bringing into use – Silvercrest Z30509 User Manual
Page 55
55
GB/MT
Bringing into use
note: The device does not measure your weight. Determine your
body weight beforehand on a separate weighing scale.
note: If you press and keep pressed the Up button
6
or the Down
button
5
, you can accelerate the setting process and reach the desired
value more quickly.
j
Press the On / Set button
7
to switch on the device.
j
The previously selected memory
13
then flashes.
j
Select a memory
13
by pressing the Up button
6
or the Down
button
5
.
j
Press the On/Set button
7
to confirm the memory
13
to be used
and allow the sex to be selected. The previously selected sex
(Male
14
or Female
15
) then flashes.
j
Press the On/Set button
7
to confirm the current sex or select the
other sex by pressing the Up button
6
or the Down button
5
.
j
Press the On/Set button
7
to store the sex Male
14
or Female
15
and allow the entry of the height. The height
16
field flashes.
j
Enter the height by pressing the Up button
6
or Down button
5
.
j
Press the On/Set button
7
to confirm the height
16
and allow
the age
12
to be entered.
j
Enter the age
12
by pressing the Up button
6
or Down button
5
.
j
Press the On/Set button
7
to confirm the age
12
to be used and
allow the weight
18
to be entered.
j
The previously selected units of weight
17
(kg, lb, st:lb) flash. Enter
the weight by pressing the Up button
6
or Down button
5
. Press
the On/Set button
7
to confirm the weight
18
.
note: By repeatedly pressing the On/Set button
7
, you can jump
from mode to mode and satisfy yourself that your data are correct.
tip: If your data are already stored in a memory
13
, press the On/
Set button
7
to switch on the device. Then press the Up button
6
or the Down button
5
to select the memory
13
as described
above, press the Start button
4
and then continue immediately