Caution, 2 c199 main control board and asf sensor removal, Figure 3-3. asf sensor removal – Epson 200 User Manual

Page 36

Text mode
Original mode

3.2.2 C199 MAIN Control Board and ASF Sensor Removal

Remove the upper case (see Section 3.2.1).

Remove 4CBB (M3

6) screws attaching the shield frame to the C160 MAIN Board.

Remove 7 connectors (CN1, CN8, CN7, CN4, CN3, CN5, CN6) on the main board. (Push CN6 down to
release cable on main board.) Then remove the C199 Main Control Board.

Remove a CBB (M3x6) screw fixing a ASF Sensor holder to printer mechanism.

When you replace the C199 MAIN Board, reset the EEPROM and perform the required
adjustments. (See Chapter 4.)

CBB(M3x6)

C160 PSB/PSE Board

ASF Sensor Holder

Figure 3-3. ASF Sensor Removal

CB B(M 3x 6)

CBB(M3x6)

CB B(M 3x 6)

CB B(M3 x6)

Shield Plate

C N 1

C N 8

C N 7

C N 4

C N 3

C N 5

C N 6

C1 99 Main B oa rd

C N 9

Figure 3-2. C199 Main Board Removal

CAUTION

EPSON Stylus Color 200 / EPSON Stylus 200

Disassembly and Assembly

Rev. A

3-3