Silvercrest SMZS 1600 A1 - Manual (Page 66)

66
3 Operation
3 Operation 3.1 Vacuum cleaning
1. Attach the desired nozzle
ZChapter 2.2, "Assembly" or
ZChapter 2.3, "Using further nozzles (accessories)".
2. Pull out the power cord until the yellow marking is visible
(Fig. 13/1).
3. Insert the mains plug into a socket with ground/safety
contact.
4. Switch on the cylinder vacuum cleaner with the on/off
switch (Fig. 14/1). The green indicator light is on.
WARNING:
Danger of injury! A damaged appliance must never be
used. Check the vacuum cleaner and the power cord
each time before using it.
WARNING:
Danger of injury! Especially when vacuum-cleaning stairs
make sure that you always stand on a higher level than
the appliance.
ATTENTION:
Only use the cylinder vacuum cleaner when all filters are
intact, dry and correctly fitted. Make sure that no open-
ings are clogged. Otherwise the vacuum cleaner might
be damaged.
ATTENTION:
Check the requirements of your floorings before using
the vacuum cleaner. Follow the recommendations of the
flooring manufacturers.
WARNING:
Danger of electric shock! If the red marking shows
(Fig. 13/2) retract the cord by pressing the retract button
to pull in the cable (Fig. 14/2) up to the yellow mark
again. Otherwise the cable can break off.
13
14
66492_Silvercrest_Multicyclone-Bodenstaubsauger_SMZS_1600_A1__ES_IT_PT_GB_DE.pdf 65 20.05.2011 09:27:57