Silvercrest SSR 1080 B2 - Manual (Page 133)

Satellite Receiver SSR 1080 B2
English - 131
Update
This item allows you to upgrade your satellite receiver software.
Transponder
The most up-to-date software can be obtained (as soon as
available) via the ASTRA (19.2° East) satellite. Please do not
change these settings, unless you are instructed to do so by our
Customer Service.
Auto OTA
This lets you search for software updates automatically once a day.
As soon as new software is available for your satellite receiver, it
will install automatically. Select the “On” option to enable this
function. Selecting “No” disables this function.
Auto OTA Time
Press the /VOL- or /VOL+ navigation buttons (26) to select the
start time for the automatic software search. You can adjust the time
in one-hour intervals between “1 AM” and “8 AM”. Please note
that this function is available only after setting the “Auto OTA”
option to “On”.
Press the [Red] button (39) to check for software updates
immediately. Searching and loading may take several minutes.
Do not power the device off or disconnect it from the mains during
the software update! This could result in permanent damage to your
device.